Based on the performance and appearance of the lens, there are P-type, E-type, L-type and automatic zoom lens. The information from China Instrument Supermarket is described as follows:
1. P-type lens
(1) Automatic positioning lens, the pupil focus has been adjusted, and it is necessary to check whether the clarity from the maximum magnification to the minimum magnification is consistent and clear.
(2) Check the coaxiality, that is, the maximum magnification to the minimum magnification is in the same position, and it cannot be offset or the offset is too large. It is considered a defective product and the lens must be replaced.
(3) The optical magnification is 0.7-4.5X, that is, there are nine magnifications between 0.7x and 4.5x.
(4) The clarity is judged based on the calibration block and the actual object imaging reflection.
2. E-type lens
(1) This lens is a common industrial lens. The pupil focus needs to be adjusted manually. After the machine is installed, the image is clear when the maximum and minimum magnifications are adjusted manually. If the clarity cannot be adjusted, it is considered a defective product. If there are unstable factors such as shaking after adjustment, it is also considered a defective product.
(2) Check the coaxiality, that is, the image is taken at the same position from the maximum magnification to the minimum magnification. It cannot be offset or the offset is too large. It is considered a defective product and the lens must be replaced.
(3) The optical magnification is 0.7-4.5X.
(4) The clarity is judged based on the calibration block and the actual object imaging reflection.
3. L-type lens
(1) This lens is a common industrial lens. The pupil focus needs to be adjusted manually. After the machine is installed, the image is clear when the maximum and minimum magnifications are adjusted manually. If the clarity cannot be adjusted, it is considered a defective product. If there are unstable factors such as shaking after adjustment, it is also considered a defective product.
(2) Check the coaxiality, that is, the image is taken at the same position from the maximum magnification to the minimum magnification, and there is no deviation or too much deviation. It is considered a defective product and the lens must be replaced.
(3) The optical magnification is 0.7-4.5X.
(4) The clarity is judged based on the calibration block and the actual object imaging reflection.
4. Automatic zoom lens
(1) For automatic positioning, the pupil focus of the lens itself has been adjusted. It is necessary to check whether the clarity from the maximum magnification to the minimum magnification is consistent and clear.
(2) Check the coaxiality, that is, the image is taken at the same position from the maximum magnification to the minimum magnification, and there is no deviation or too much deviation. It is considered a defective product and the lens must be replaced.
(3) The optical magnification is 0.7-4.5X.
(4) The clarity is judged based on the calibration block and the actual object imaging reflection.
